New Pelco NET300T CCTV Network Video Transmitter With AC Power Adapter

Pelco NET300T CCTV Network Video Transmitter With AC Power Adapter

In good condition and in full working order

Model Number: NET300T

Includes

• 1 x Pelco NET300T CCTV Network Video Transmitter With AC Power Adapter

PRODUCT HIGHLIGHTS

• Send & Receive Live Video Over Ethernet
• Dual MPEG-4 Video Streams
• Full Integration w/ Pelco Products
• Adj. Bandwidth, Image Rate & Quality
• View Video on PC, Analog Monitor or Both
• Alarm Input and Relay Output
• Bidirectional Data Channel
• Saves w/ Installation Costs

Overview

PelcoNet transmits (NET300T) live video and data across existing Ethernet networks. Sending video over computer networks yields significant cost savings by using an existing computer network to monitor a remote site

Network video transmitter that encodes video and control data for transmission over an IP network

The NET300T, featuring dual MPEG-4 video streams, lets you use computer networks to interface your control and monitoring stations with remote camera sites, whether they are in the same building, across the country, or around the world

The device connects to a system of Pelco matrices or Genex multiplexers to view video from a vast number of camera analog inputs. In this application the analog device is being used as a "concentrator" to allow viewing of hundreds of cameras without incurring the cost of hundreds of encoders

The NET300 saves installation costs (no separate cabling required), allows toll-free operation

If you need to control a camera (operate pan, tilt, and lens functions, or do presets and patterns), an RS-232/422/485 data interface links the keyboard controls to the network and then from the network to the camera system

Instead of (or in addition to) a receiver and monitor, an Internet browser can be used at the receiving end to display video on a PC. On-screen keyboards in the NET300 let you control the following devices over the network: System 9700 Series or CM6700/CM6800 matrix controller, Genex multiplexers, Spectra domes, and Esprit positioning systems

The NET300T, featuring dual MPEG-4 video streams, lets you use computer networks to interface your control and monitoring stations with remote camera sites, whether they are in the same building, across the country, or around the world

SPECIFICATION Signal System NTSC and PAL Resolution 1024 x 768 Frame Rate Up to 30 images/second Built-In Card Slot No Video Inputs 1, BNC, PAL/NTSC, 75 ohms, 1 Vp-p Video Outputs 1, BNC, PAL/NTSC, 75 ohms, 1 Vp-p Audio Inputs 2 terminal, 30 VDC maximum Audio Outputs 2 terminal, 30 VDC maximum Motion Detection No Network Interface Yes Network Protocol Ethernet 10/100BaseT autosensing, RJ-45 USB Port No VGA Output Graphic Card: ATI RADEON 7500 or 8500, Matrox G 550 or Parhelia,
or NVIDIA GeForce 3 or 4 with MPEG-4 playback capability Control Ports RJ-45 Alarm I/O 1 terminal, 30 VDC, 1 A Power Requirements 12-24 VDC, power supply included Power Consumption 10W Operating Temperature 32 to 122°F (0 to 50°C) Dimensions (WxHxD) 3.4 x 1.2 x 4.5" (86 x 30 x 114mm) Weight 2 lbs (1kg

AJ 164703 (I/B 164695)